Timing of Shedding

The shedding mechanism is set according to the picking & beat-up mechanisms. Timing of shedding is set with respect to crank position. In general there are three timings. These are:

1. Normal shedding
2. Early shedding
3. Late shedding

Normal shedding: If the heald shafts are at the same level when the crank comes to the top center, that is 0 degree or 360 degrees, then it is known as normal shedding.

Early shedding: A shed is said to be early when the pick insertion is effected after the shed is completely open. If the heald shafts are at the same level when the crank comes to 355 degrees or 5 degrees before the top center, then it is known as early shedding.

Advantages of early shedding:

1. Fabric cover is improved, because during beat-up, the warp yarns are evenly distributed.
2. It assists in clearing the shed while weaving fibrous warp like woollen & worsted. So entanglements are avoided.
3. Heavy weft yarn can be easily inserted. So hard weaves like corkscrew weaves can be woven.

Disadvantage: As the warp yarns are open widely during beat-up, strain on the warp yarn is high. Early shedding causes chaffing of warp yarn (yarn abrasion) & end breakage may occur.

Late shedding: If the shafts are at the same level when the crank comes to 5 degrees after top center, then the shedding is known as late shedding.

Advantages of late shedding: Late shedding allows the weft yarn to get beaten up before the shed has been properly crossed. During beat-up opening the shed is minimum. So strain on the warp yarn is low.